mark r

Hi, should the rear axle have a sleeve/spacer inside the hub between the wheel bearings and if so are the available any where or does any on know the size?

Hi Hillary, Thanks for the Info

Hi, I purchased Advanced Tickets for both Saturday and Sunday at Tong, does anyone know when the tickets will still be posted or who I can contact

Hi, does anyone know where I can buy a alloy end cap for the exhaust of my 2013 pro in the UK. I have melted the plastic one

Thanks for all the info, unfortunately I wont be able to ride for a couple of weeks but will update when I have had a chance to try some new jets and settings

Hi Paul, Its a new carb and I have already cleaned it and checked the float height, I will try a larger pilot

I have fitted a Mikuni VM26-8074 to my MK2 MAR this came with 190 main and 50 pilot I have now fitted a 150 main and 30 pilot and it is running ok but the throttle response at low to 1/4 throttle is still not right, as the main and pilot were to large I was wondering what the Air Jet size should be, the one fitted appears to be 0.5 but it is very hard to read

Hi, Does anyone have a recomendation for Black Exhaust paint for the middle box and silencer on a MAR, most of the exhausts paints seem to be Matt and I was trying to match the original gloss

Hi Bill, Thanks for your reply, I was leaning toward the Canon 6D due to its low light advantage over the 7 or 70D, I had not considered the 5D II so I will investigate that as well

Hi, I am going to update my Canon 20D, and would like to know if anyone has used a Canon 6D or 7D for trials photography? The main issue I have is lack of available light when taking photos in the woods, even using an external flash.

Thanks for the info I have a older Toyota Rav4 and I am thinking of changing it soon and i have not seen a Yeti at our local trials

Hi, Has anyone tried a bike rack on a skoda Yeti, and if it works ok what towbar do they use.